You are here: Home » Case Studies » On-Site Machining (OSM) » Case Study: BAE Systems Airbus

Case Study: BAE Systems Airbus

Contact Us

Contact Us

Just like to thank  all involved in designing the strong back arrangement to allow the valve on the cs925 to be opened.  The job was done safely and professionally with some trying moments due to the weather conditions today. So thanks again for a really good job.
Andrew Knight
Esso Australia

Solution & Implementation

A unique pylon milling machine designed and produced for BAE Systems Airbus United Kingdom by Furmanite, is used in the manufacture of the wings for the new variant Airbus A340-600. Furmanite worked closely with Airbus UK on this latest variant of the Airbus A340-600 at the jig development stage, using the latest computer-aided 3D design, so that the milling machine and jig designs could be integrated, to achieve optimum performance. The lightweight milling machine is designed to attach to the A-frame jig to enable the part of the wing known as the plateau, to which the pylons holding the outboard engines are attached, to be milled in-situ on the wing jig.

Results

The result is a highly accurate, ‘picture frame’ milling machine  800-900mm square and 500mm deep built using light-weight materials (ensuring that the A-frames are not distorted when the machine is mounted), that will mill to an accuracy of within less than 0.1mm. Their use saves up to 16 hours in the time taken to make each set of wings. The time and cost benefits are substantial.

Case Study: BAE Systems Airbus

New milling machine for Airbus wings

CUSTOMER: BAE Systems Airbus 340-600

To overcome the need to remove the plateaux (part of the wing) to be milled flat for a precise fit, as well as avoiding the risk of distortion when re-fitted to the aircraft.

Specialty industrial service and product solutions provider, Furmanite supplies an ever increasing range of industries with maintenance tools and key engineering services such as leak sealing, hot tapping and line stopping. For comprehensive plant and pipeline maintenance and asset uptime maximization, rely on Furmanite.

Copyright © Furmanite 2012
On-Site Technical Bolting – Spill Containment

Featured

111130-Leak Sealing-Sub Sea Clamp

On-Line Leak Sealing

Our leak-sealing technology and unrivaled
on-site service help you maximize asset uptime
by sealing leaks online, onsite and under pressure. This means you keep producing the ‘product’ while we solve your leak problems.

Discover More
Process Piping System Hot Tap

Hot Tapping

At Furmanite we carry the largest and most diverse inventory of Hot Tapping equipment
in the world. We have a proven record of developing unique and custom Hot Tap solutions for the most complicated scenarios.

Discover More
111130-Line Stopping

Line Stopping & Plugging

Our Line Stopping services help prevent unwanted shutdowns and keep critical piping
and pipeline systems online during tie-ins, relocations, repairs, retrofits and routine maintenance.

Discover More
111130-On-Site Machining

On-Site Machining

Our portable machining tools deliver the benefits of a fully equipped machine workshop on-site – where our clients need it most. We consistently achieve tolerances and finishes usually only achievable in a machine shop.

Discover More
111202-Self Leveling Machines

Self Leveling Machines

Furmanite’s Self Leveling Machines deliver precision on-site machining for large circular and irregular shaped surfaces. Our circular and linear machining equipment is portable and ready for global deployment.

Discover More
111130-Composite Repair-Absailing

Composite Pipe Repair

Our range of composite repair solutions is designed to ensure the ongoing structural integrity and load-bearing capabilities of your assets, improving their longevity whilst minimizing the impact on your productivity.

Discover More
111202-Heat Treatment-3

Post Weld Heat Treatment

Furmanite offers a full range of heat treatment services through a wide range of temperatures. We manufacture, own and operate the most technologically advanced heat treatment equipment available in the marketplace.

Discover More
111202-All Services-Steam

All Services

We offer a comprehensive range of on-site
and on-line plant and pipeline maintenance services. From standard applications to highly customized solutions our goal is to help you maximize your asset up time.

Discover More
111201-Hot Tapping Machine

Hot Tapping

Furmanite has been manufacturing Hot Tapping equipment for over 50 years. Our Hot Tapping Machines ensure your critical piping systems maintain a continuous flow while installing new tie-ins and branch connections.

Discover More
111201-Line Stopping

Line Stopping & Plugging

For over 50 years Furmanite’s Line Plugging equipment has been helping clients maintain a continuous flow on critical piping systems while performing repairs, relocations, valve or pump installations and pipe modifications.

Discover More
111201-Pipeline Repair

Pipeline Repair Products

We have a wide range of Pipeline Repair
and Integrity products designed to handle emergency leak repairs in high pressure environments and improve the structural integrity and safety of your pipelines.

Discover More
111201-Silk Machine

Portable Machining Tools

Furmanite’s Silk portable and lightweight machine tools provide high tolerance solutions for a variety of problems. Renowned for their sound engineering, our Silk machines help you deliver precision onsite machining.

Discover More
valve-products-home-feature-thumb

Valve Products

The Wilson Snyder Switch Valve has provided proven reliability for over 75 years in Coker Switch Valve applications. Wilson Snyder Switch Valves have the lowest steam consumption in the industry.

Discover More
111201-Health-and-Safety

Health & Safety Products

We offer a wide range of proprietary Safety, Environmental and Maintenance products designed to eliminate injuries and improve pipeline safety. At Furmanite, your ongoing safety is our number one priority.

Discover More
111201-Smart Shim

Chocking Prevention

Furmanite’s SmartShim™ is a truly effective and state-of-the-art conductor analysis and chocking solution that will ensure your offshore production site remains productive, powerful and profitable.

Discover More
111201-Valve Products

All Products

Furmanite has been a trusted resource for sophisticated engineering products for over
75 years. From Hot Tapping to Line Stopping, we have a wide range of products to meet your pipeline repair and maintenance needs.

Discover More
hot-tapping

Industries

Furmanite is a world leader in the provision of on site services to clients in the mining, petro-chemical, off shore, oil & gas, powergen, marine, pulp & paper and general engineering industries globally.

Discover More
Milling-head-(JL)

Case Study: BAE Systems Airbus

To overcome the need to remove the plateaux (part of the wing) to be milled flat for a precise fit, as well as avoiding the risk of distortion when re-fitted to the aircraft.

Discover More
Furmanite-SSRC-1-Flattened

Case Study: Esso Fawley Refinery

Esso’s unit 1 boiler at Fawley was shutdown for repair. The unit 2 boiler had developed a superheater tube leak. The challenge was to carry out a repair, the alternative was a shutdown of the major processing units.

Discover More
hot-tapping

Case Study: Major Operator

The customer wanted to modify their petrochemical plant – but they didn’t want to shutdown.

Discover More
line-plugging

Case Study: North Cormorant Platform

The original configuration of pipe-work on the North Cormorant platform of the Otter over Eider project, did not lend itself to the increased flow.

Discover More
Trevitest-Bahrain

Case Study: Nuclear Electric

Accurate and reliable valve testing was required in quick time as part of the pre-commissioning process.

Discover More
weld-isolation-testing

Case Study: Shell Expro Gannet Platform

When Shell United Kingdom Exploration and Production (Expro) introduced a new Induced Gas Floatation Unit (IGFU) onto their Gannet platform they had planned to finalise the installation during a 30-hour shutdown.

Discover More
Make An Inquiry Make An Inquiry

We're here to help...

We're here to help For the nearest Service Delivery Center (SDC)
USA Locations
Global Locations

North America

We're here to help For the nearest Service Delivery Center (SDC)
USA Locations
Global Locations
101 Old Underwood Road , Unit E
LaPorte, Texas 77571
P: (800) 444-5572 / (281) 842-5100
P After Hours: (281) 842-5100
F: (281) 842-5111

Latin America & The Caribbean

We're here to help For the nearest Service Delivery Center (SDC)
USA Locations
Global Locations
Latin America and Caribbean Headquarter
101 Old Underwood Rd
La Porte, TX 77571
Att. G. Mariela Carrillo
Regional Sales Manager
P: (281) 842-5124
E: gcarrillo@furmanite.com

Africa

We're here to help For the nearest Service Delivery Center (SDC)
USA Locations
Global Locations
Furmseal CC - South Africa
Furmseal t/a Furmanite
Unit 5 Dunford Park
Gosforth Park
Germiston
Republic Of South Africa
P: +27 (0)10 590 5800
F: +27 (0)10 590 5802
E: info@furmseal.co.za

Europe

We're here to help For the nearest Service Delivery Center (SDC)
USA Locations
Global Locations
Furmanite International Ltd - United Kingdom, Furman House
Shap Road
Kendal
Cumbria
LA9 6RU
P: +44-1539729009
F: +44-1539 729359

Asia

We're here to help For the nearest Service Delivery Center (SDC)
USA Locations
Global Locations
Furmanite Singapore PTE Ltd - Singapore
21 Serangoon North Avenue 5
#06-01 Ban Teck Han Building
Singapore 554864
Republic Of Singapore
P: +656-4848066
F: +656-5562027

Australia & NZ

We're here to help For the nearest Service Delivery Center (SDC)
USA Locations
Global Locations
Furmanite Australia Pty Ltd.
4 Gateway Court
Port Melbourne, Victoria 3207
Australia
P: +61-3-9285-2200
F: +61-3-9645-2948

Need a Global Expert?



Furmanite - Innovative since 1920

Leak Sealing process developed leak-sealing-developed_thumb 01/01/1920

Furmanite Leak-Sealing process is Developed The under pressure Leak Sealing process is developed by Eugene Clay Furman at the Newport …

More First DIY Leak-Sealing Kit old-furmanite-leak-sealing-equipment 01/01/1924

First DIY Leak-Sealing Kit The first do-it-yourself Leak Sealing kits were developed and marketed by Clay Furman and while they …

More Long Standing Relationships Sales-Brochure-1926_thumb 01/01/1926

Long Standing Relationships US customer reference list that includes individual war ships in the US Navy, US steel companies and …

More 1st Patent is filed in 1927 furmanite-patents1 01/01/1927

1st Patent is filed in 1927 The Furmanite patent for the leak sealing process filed in 1927 was the first …

More Furmanite moves Overseas Liverpool-Exibition_thumb 06/01/1927

Furmanite moves Overseas First overseas agents appointed to market the leak Sealing kits including in the United Kingdom and Europe…

More Costs of a steam leak Sales-Brochure-1926-pg-8_thumb 06/01/1928

Price List from 1926 Table detailing costs of allowing a steam leak based on $4 per ton for “Long coal”. …

More Furmanite is thinking global furmanite-the-skys-the-limit_thumb 01/01/1929

Furmanite is thinking global A brief history of the United Kingdom Company written by A W Forsyth (OBE) in September 1973 …

More Technology Development leak-sealing-diagram 11/22/1934

Technology Development Furmanite Expands Engineering on Leak Sealing Technology. Photographs taken from a 1934 sales brochure together with schematics of …

More Growing Furmanite purchase-letter_thumb 05/01/1960

Growing Furmanite Letter from the Chairman of Furmanite Engineering based in Birkenhead, England to his lawyer requesting information on a …

More New Direction New-Technology_thumb 01/01/1966

New Direction Alan Forsyth, acting as a consultant to Furmanite Engineering (1929) advised the Board to move from selling low …

More Never compromise on the high quality Company-History-July-1979_thumb 07/01/1979

Never to compromise on the high quality A brief history of the United Kingdom Furmanite organisation written by Joyce Hainsworth, the …

More Best in the business were called NASA---Discovery-Team_thumb 09/01/1988

Best in the business were called Furmanite successfully seals nitrous oxide leakage on the Space Shuttle “Discovery” pre launch September …

More Start of Modern Furmanite company-overview 11/22/1991

Start of Modern Furmanite The common shares of Furmanite were acquired by Kaneb Inc on 24th January 1991. Furmanite remains …

More Acquisition-GSG Division Acquisition-GSG-Division_thumb 01/13/2006

Acquisition of Flow-Serve GSG Division Furmanite as part of Xanser Corporation acquired the General Services Group (GSG) of Flow-Serve corporation …

More Corporate Name Change Corporate-Name-Change_thumb 01/13/2007

Corporate Name Change Xanser Corporation (NYSE:XNR) changed the company’s name to Furmanite Corporation, and the company’s shares were traded on …

More Acquisition of SLM Acquisition-of-SLM_thumb 04/13/2011

Furmanite Corporation Acquires Self Leveling Machining Technology Furmanite expanded  its global on-site machining capabilities through the acquisition of Self Leveling …

More
Furmanite

Contact Us

  • Note: Forms may be submitted only once per webpage session.